There are air channels on the side surfaces of the hood that provide fresh air and oxygen to the inside.

 Hood filters are in a form that will allow the accumulated oil to accumulate in the oil channels around the hood with a suitable slope and can be easily removed and cleaned, and they are in a structure to prevent the passage of flame and spark with interlocking trapezoidal cross section.

 It has 60 mm wide oil channel. If desired, it is possible to illuminate with special waterproof type fixtures.

 It is produced entirely from 1.0 mm thick AISI304 quality 18/8 Cr.Ni stainless steel sheet.

 Installation of the hood to the ceiling is done with steel dowels and plastic coated steel suspension ropes.

 There are two options as island type and Wall type.

 It can be produced in desired size.